AC and DC Charging
SLAC and V2G
DIN and ISO
Ensuring correct EV and EVSE communication
Portable charging test systems for charging communication according to DIN 70121 and ISO 15118
Portable Charging Test Systems
Eclipseina offers up-to-date test solutions based on the DIN 70121 and ISO 15118 charging standards for both the vehicle and the charging station. Hardware in the Loop HIL as well as Software in the Loop SIL solutions are offered.
Why do I need a portable charging test system?
Interoperability testing for EV and EVSE
Do you want to ensure that your electric vehicle can be charged at any charging station or that your charging station can be used by all common vehicles on the market? With interoperability testing, you can ensure that your solution meets the requirements.
Quality assurance during development
Early testing ensures a successful product development. Charging test system can be used during the development phase and thus ensuring quality already at this point. At an earlier stage of development SIL tests are performed and later the test with the hardware is added.
End-of-line testing in electronics production
A targeted test selection for end-of-line testing in your electronics production ensures that the charging communication of the individual charging controllers and control units works properly.
The portable EC-CHARGE test system has a wide range of applications and can also be used outside the workshop thanks to its compact design in a convenient case.
Possible applications include
- Workshop use, troubleshooting (plug-in hybrid, fully electric vehicle)
- Test after repair
- Safety check
- End of line test
- Inspection after service
- Diagnostic test
Das Anwendungsgebiet des portablen Charging Testsystems ist vielseitig und dank seiner kompakten Bauart im vorteilhafen Koffer auch außerhalb der Werkstatt nutzbar.
Mögliche Anwendungen sind zum Beispiel:
- Fehlersuche an einer AC Wallbox oder Ladesäule
- Test nach Reparatur
- Test nach Neuinstallation
- Sicherheitsüberprüfung
- End of Line Prüfung
- Überprüfung nach Serviceeinsatz
- Diagnoseprüfung
Das Anwendungsgebiet des portablen Charging Testsystems ist vielseitig und dank seiner kompakten Bauart im vorteilhafen Koffer auch außerhalb der Werkstatt nutzbar.
Mögliche Anwendungen sind zum Beispiel:
- Werkstatteinsatz, Fehlersuche (Plug in Hybrid, Vollelektro Fahrzeug)
- Test nach Reparatur
- Sicherheitsüberprüfung
- End of Line Prüfung
- Überprüfung nach Serviceeinsatz
- Diagnoseprüfung
The test packages are integrated into the SIL software environment and cover the V2G test cases from the test standards DIN 70122 and ISO 15118-4/-5.
In order to meet customer-specific requirements, the test packages have been divided into the various sub-aspects and can be selected for electric vehicles EV and for charging stations EVSE on the basis of the following criteria:
- Test according to DIN 70122 resp. ISO 15118-4/-5
- AC charging AC / DC charging DC
Since the SIL tests are performed exclusively on the PC, there is no low-level communication via PWM and also no physical powerline communication. For this reason, in contrast to the HIL test solution, only V2G test cases are available, but not SLAC test cases.
Further customer-specific test cases that go beyond the contents specified in the standard are covered by our expert and test support.
Do you need a test system?
What requirements do you have for the test system? We are looking forward to your inquiry!